Stainless steel quarto plates
Thicknesses: from 6 to 150 mm
surface: 1 (hot rolled)
Standard sizes: 1500 x 6000 – 2000 x 6000 – 2000 x 8000 – 2000 x 12000 – 2500 x 6000 – 3000 x 6000
Thickness tolerances: ASTM A240/A480 – EN 10029
Nickel Alloys
Thicknesses: from 2 to 60 mm
surface: 1 (hot rolled)
Standard sizes: 1500 x 6000 – 2000 x 6000 – 2500 x 6000
Thickness and flatness tolerances
ESTRATTO UNI EN 10029 - prospetto 1
ESTRATTO UNI EN 10029 - prospetto IV*
* Steel type L: Products with a specific minimum yield point <= 460 N/mm², with a specific exception of hardened and tempered steel.
Steel type H: Products with a specific minimum yield point > 460 N/mm² and >700 N/mm² and all hardened and tempered steel.
ESTRATTO ASTM A480 - Tabella A2.17
ESTRATTO ASTM A480 - Tabella A2.20
*
* Tollerances in this table apply to any length up to 914 mm, if the longer dimension is under 914 mm the tolerance is not greater than 6,4 mm. For plates with specified minimum yield strengths >= 240 MPa, the permitted variations are increased to 1,5 times the amounts shown.
SAW CUTTING
SAW CUTTING
WATERJET CUTTING
WATERJET CUTTING
STOCK
STOCK
